- I. Permission you need to have before installing a new patio for your house
- II. Common requirement for patio cover
- III. Religion rules and regulation you must know before designing attached patio
- IV. Patio cover material choices
Patio cover specifications new house project. How much does patio cost. How to get building permit for patio. Requirement for patio installation. Wood patio cover, Vinyl patio cover, Aluminum patio cover, Composite patio cover.
In this article, you would know about what is a patio requirement and how to build it correctly.
Only for recreational or outdoor living purposes, patio covers are one-story, roofed constructions no more than 12 feet above the ground. Patio covers must have a minimum clear height of 6′-8′ from the floor to the soffit of supporting elements when opening on one or more sides. Nothing other than insect screening with a mesh finer than 16″ X 16″ or easily removable, transparent, flexible, plastic screening with a maximum thickness of 20 mils may be used to cover the open side of the window. Solid walls no higher than 30 inches above floor level may be used to partially enclose any open sides where there are two of them, in addition to screening. A patio cover cannot be used to build a second-story walkway, a carport, or a storage space.
Read more: Unique ideas for patio deck covers
I. Permission you need to have before installing a new patio for your house
1. Building permit for changing house facilities
In most cases, a building permit is required for any type of structural work done to a house. Enclosure or covering of the patio nearly always necessitates a permit. This job would include installing a patio door. A door alteration does not require a building permit if the existing aperture is repurposed. The addition of patio lights may necessitate permission from the city’s electrical department.
2. Building permit for changing house structure
Structural modifications necessitate a construction permit. A land-use zoning issue arises whenever the outside of a house undergoes any kind of change. The presence of site-specific challenges in various locations is another potential source of restriction. Before making the assumption that the patio and any accompanying construction operations do not require permits, you should check the codes that apply in your area.
II. Common requirement for patio cover
Single-story structures with a maximum height of 12 feet must be used as covers. Most jurisdictions distinguish between constructions that are on the ground and those that are elevated. The definition of height limitation and restriction varies greatly from city to city. In some circumstances, a permission may be necessary if the project exceeds a certain size limit. An environmental protection zone, for example, or concerns about excavating in the zone, are other exceptions.
2. Patio function
The patio cover’s main function is to cover the patio. Carports, garages, storage facilities, and habitable rooms may not be constructed using covers.
3. Wall configuration
If the longer wall plus one extra sidewall make up at least 65 percent of the total wall area below 6 feet 8 inches, measured from the floor, of each wall, there is no limit on the pattern of enclosure walls.
4. Material for patio wall panels
Translucent or clear plastic panels or authorized glass can be used to cover the walls of patio cover structures.
5. Emergency exit
The patio cover cannot be enclosed if it surrounds a sleeping room’s emergency exit entrance. You can enclose the cover, but it must have its own code-compliant exit if the cover surrounds an outside door.
6. Roof weight
Local construction codes dictate the way patio cover roofs can be affixed to a building.Unless local snow or wind load requirements exceed this minimum, the IRC recommends a minimum design load of 10 pounds per square foot.
III. Religion rules and regulation you must know before designing attached patio
1. Setback law
The distance a patio can extend from your property line may be limited by local laws.
2. Height restriction laws or structural laws
The size of your patio may be restricted by local government regulations on the quantity of land that may be developed or occupied.
3. Water conservation and drainage law
Drainage or water conservation legislation may impose restrictions on the design of certain parts. To limit stormwater flow, a permeable patio material may be required.
4. Right Of Ways Easements Made Easy
A patio may not be viable if public rights of way or easements are not developed.
5. Power lines and underground utility
Because of the presence of electricity lines and other infrastructure, patio locations can be affected. The different states can have different rules and regulations about power lines and underground utilities.
IV. Patio cover material choices
1. Classic wood patio cover
Coverings for patios that are made of wood lattice can be designed in a broad variety of different ways. The combined cost of labor and supplies was close to $13,000. Coverings for patios made of wood lattice are typically crafted on an individualized basis.
An engineer will need to spend between $1,500 and $2,000 on the plans in order to make one of these. It has a good appearance and is simple to fix in case it breaks. It is possible that it may need to be repainted or restained every few years, which will incur a cost of approximately $2,000 each time.
2. Vinyl patio cover
Vinyl patio coverings have a long lifespan. They’re unfazed by rain, wind, and even the hottest sun. Once installed, you can expect them to last for many years. This means that you don’t have to worry about mold and mildew causing dark stains or irritating your family and friends.
Low-maintenance: Vinyl patio coverings are easy to clean and maintain. You can simply hose it off if you see pollen or outdoor dust on your skin. In the event of strong rain or wind, you won’t have to deal with costly patio repairs. Other patio covers make it tough to find this, and you’ll have to spend more time cleaning up after a storm anyhow. As the leaves fall, they will fall on the cover, rather than the patio, so you will have less to rake in the autumn.
3. Aluminum patio covers
Fortunately, aluminum patio covers come in a large variety of colors. There are many common color choices: white, sandstone, adobe, and bronze.
Patio coverings are designed to last for many years. For an aluminum patio cover, gutters and valence are conventional reinforcements. On the other hand, aluminum’s high durability makes it an ideal choice for a patio cover.
There are some homeowners who are put off by the amount of upkeep that a patio cover may need. On the other side, aluminum patio covers are low maintenance. Aluminum has excellent finishes that make cleaning a joy in addition to its rust resistance.
4. Composite patio cover material
The four distinct seasons in Seattle are notorious for wreaking havoc on our homes’ exteriors. You won’t have to worry about the material deteriorating if you choose a composite cover. The composite cover is extremely long-lasting; it won’t rot or fracture, and it’s resistant to mold and doesn’t lose its color with time. If you enjoy the look of real wood but don’t want to deal with the upkeep, a composite cover can be a good option for you. The grain of real wood can be replicated in composite covers. It satisfies your desire for fashion while also providing the advantages of using composite materials. Your home’s exterior can be complemented by a range of colors and styles.
Although the decking material has a lengthy lifespan, it can nevertheless be damaged over time. If you ever need to repair your composite patio covers, they come with a long warranty. There is a sense of security in knowing that your new deck is covered by insurance, even if it is an extremely rare event.
To reach Decking Pros NW for detailed information about the services below is some more information for you:
Phone: (206) 279-1450
Open Hours: 8:00-18:30